Whirlpool Error Code PF

What PF Means

PF stands for power failure, and it's really more of a notice than a fault code. It simply means the washer or dryer lost power partway through a cycle — whether from a household outage, a tripped breaker, or the unit getting unplugged — and the appliance is letting you know the cycle didn't finish as expected. Unlike most codes on this site, PF usually clears itself once you deal with the underlying power interruption.

Likely Causes

• A brief neighborhood or household power outage
• A tripped circuit breaker on the laundry room circuit
• The appliance accidentally being unplugged, or its outlet losing power
• An intermittent connection at the plug or outlet, less common but possible

What You Can Check Safely

Check your home's breaker panel for a tripped switch on the circuit that feeds the laundry room and flip it back if needed. Confirm the appliance's plug is fully seated in the outlet. Once power is confirmed steady, press start again, or press clear/cancel first if your model requires that before restarting — this varies slightly by model, so check your manual if the usual button doesn't respond. There's nothing else to check yourself beyond confirming power is present and stable.

When to Call a Technician

A single PF code after a known outage or breaker trip usually isn't worth a service call. But if PF keeps showing up repeatedly with no power interruption you're aware of, that points to a loose internal power connection or an intermittent electrical fault that's worth having checked before it causes a bigger problem. Our team covers both washer repair and dryer repair for Whirlpool appliances across Greater Victoria.

Call (250) 522-2252