Washer Repair in Victoria
Washer won't drain, won't spin, or leaking onto the floor? A local technician can diagnose it in your home and often fix it the same visit.
What's Going Wrong
A washer problem usually announces itself with water where it shouldn't be, or a cycle that just won't finish. Some of these are quick fixes; others point to a part that's wearing out and worth replacing before it fails completely.
Common Problems
- Washer won't drain
- Won't spin, so clothes come out soaking wet
- Leaking water onto the floor
- Won't start, or loud banging during the spin cycle
Why It Happens
Drainage problems are almost always a clogged pump filter or a kinked drain hose — lint, coins, and small items build up over time and block the flow. A washer that won't spin often has a worn drive belt or a door/lid switch that isn't sensing the door is closed. Leaks trace back to a failing water inlet valve or a hose connection that's loosened. Banging during spin usually means the load is unbalanced or the suspension springs that cushion the drum have worn out.
How We Repair It
We start by running a cycle and watching where in the process it fails — draining, spinning, or filling. That narrows it down fast. Pump filters and hoses get cleared on the spot. Belts, switches, and inlet valves are common parts we carry on the truck, so most washer repairs are done in one visit. If the drum bearing or suspension needs replacing, we'll walk you through the cost before starting since that job takes longer.
Cost Range
$110 – $380 typical
A clogged filter or hose is on the low end. Belt, suspension, or bearing repairs cost more. You'll know the exact price before any work starts.
FAQ
Water won't drain out of my washer — do I need a new pump?
Not usually. In most cases it's the pump filter or drain hose that's clogged, not the pump itself. A technician can check and clear it in the same visit.
Why does my washer bang loudly during the spin cycle?
It's often an unbalanced load, but if it happens even with small loads it could be worn suspension springs or a drum bearing. Both are worth having checked before they cause more damage.
Is it normal for a washer to leak a little water?
No — any consistent leak means a hose, seal, or valve needs attention. Left alone, it can damage flooring or the washer's electronics. See our error codes page if your model is also flashing a code.
Water Pooling Around Your Washer?
Call now — we prioritize leaking washer calls to prevent floor damage.
Call (250) 522-2252Book Your Washer Repair
Local technicians serving Victoria, Saanich, Oak Bay, Esquimalt, View Royal, Langford, Colwood, Sooke, Sidney, North Saanich, and Central Saanich.